1.New Energy Vehicle Technology Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will know thoroughly about the structure and mechanisms of NEV power battery systems, drive motors, electronic control systems, vehicle fault-diagnosis strategies and relevant laws and regulations, while possessing practical abilities in the assembly, commissioning, testing, and maintenance of complete vehicles and key components. Additionally, they will enjoy adequate humanistic and digital literacy, innovative mindset, and consistent craftsmanship, highly capable of engaging in vehicle and component assembly and adjustment, quality inspection, production-site management, prototype trial and testing, and maintenance and service of new-energy vehicles. Core courses: New Energy Vehicle High-Voltage Systems and Safety Protocols, Power Batteries and Battery Management Systems, Drive Motors and the Control Systems, Comprehensive Fault Diagnosis for New Energy Vehicles, Charging Pile Technology and Operation Management, etc.
2.Intelligent Construction Machinery Application Technology Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will possess adequate scientific, humanistic and digital literacy, professional ethics and dedication, and innovative mindset alongside consistent craftsmanship, entrepreneurial potential, and career sustainability. With which, they will be highly capable of coping with jobs in road/port/bridge construction and machinery repair sectors, providing technical service, like equipment maintenance, and smart device operations and management. Additionally, they will also be proficient in operating and maintaining engineering machinery, diagnosing and repairing faults, and managing equipment utilization. Core courses: Detection and Maintenance of Construction Machinery Power Systems, Detection and Maintenance of Construction Machinery Electrical Systems, Detection and Maintenance of Construction Machinery Hydraulic Systems, Detection and Maintenance of Construction Machinery Chassis, etc.
3.Electrical Automation Technology Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will possess a solid scientific literacy and mastery of professional knowledge and technical expertise. Equipped with vocational competence and operational capabilities, they will be able to serve roles such as electrical engineering technicians and automatic control engineering technicians across industries including general equipment manufacturing, specialized equipment manufacturing, and electrical machinery/equipment manufacturing. Their competencies encompass installing and commissioning electrical systems, debugging/maintaining electrical/automation equipment, designing/upgrading small-scale control systems, and commissioning/maintaining power distribution systems. Core courses: Motor & Electrical Control, PLC Technology & Applications, Factory Power Distribution, Motor Speed Control Technology, Automatic Control Systems, Industrial Networking & Configuration Technology, etc.
4.Industrial Robotics Technology Program
This program fosters hardworking and highly-skilled professionals practicing the core socialist values with Chinese heritage of craftsmanship and all-round moral, intellectual, physical and aesthetic grounding. Graduates will possess adequate scientific literacy and strong comprehensive competencies, preparing them for roles such as industrial robotics system operators, industrial robotics maintenance technicians, robotics engineering technicians, smart manufacturing engineering technicians, and automatic control engineering technicians in sectors including general equipment manufacturing and specialized equipment manufacturing. They will be capable of integrating industrial robot application systems, designing simulations, performing operational maintenance, conducting installation/debugging, and providing sales/technical support. Core Courses: Industrial Robot On-site Programming, Industrial Robot Offline Programming, Industrial Robot Workstation System Integration & Application, Electrical Control Technology, etc.
5.Road and Bridge Engineering Technology Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical, aestheticand, and labor grounding. Graduates will be capable of meeting evolving industry demands of road and bridge engineering, possessing adequate scientific and humanistic literacy, and professional ethics alongside consistent craftsmanship, entrepreneurial potential, and career sustainability. Additionally, they will know thoroughly about of cutting-edge applications including BIM Technology in Highway Engineering, GIS Engineering, UAV Applications, IoT Systems, and Smart Monitoring, while possessing competencies in on-site construction and project management for road/bridge projects. They will be ready to handle jobs in construction engineering, inspection & monitoring, cost estimation, and project supervision. Core courses: Subgrade & Pavement Engineering, Intelligent Bridge Construction, Highway Construction Organization Design, Tunnel Engineering, Road Survey & Design, Highway Inspection Technology, Bridge Construction Monitoring & Measurement, UAV Engineering Applications, BIM Engineering Applications, and Highway Cost Estimation, etc.
6.Construction Engineering Technology Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will possess adequate humanistic literacy, professional ethics, consistent craftsmanship, entrepreneurial potential, and career sustainability. Additionally, they will master core competencies including: building information modeling (BIM), smart construction site management, and detailed prefabricated component design.They will be able to integrate intelligent and digital construction methodologies to execute BIM modeling and engineering applications, implement on-site technical management, develop project budgeting and final accounts, with deep understanding of prefabricated component production/installation/detailed design, advance smart site management through digital solutions, and contribute to urban renewal and smart city initiatives as technical leaders in high-quality urbanization. Core courses: Intelligent Construction Technology, Smart Construction Organization, BIM Modeling Technology, BIM Engineering Applications, Intelligent Inspection & Monitoring, Smart Construction Equipment Control, Construction Robotics, and Prefabricated Building Construction, etc.
7.Nautical Technology Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will be ready for careers in ship navigation, shipping management, port logistics, and maritime services. Additionally, they will possess their mastery of modern navigation theory, ship handling & collision avoidance, navigational instruments, and international maritime regulations. Through simulated ship operations, ECDIS (Electronic Chart Display) training, and GMDSS (Global Maritime Distress Safety System) communications, graduates will have developed their practical competencies in vessel navigation, cargo stowage, and emergency rescue operations, meeting Third Officer competency standards under the STCW Convention while advancing smart shipping and green navigation initiatives. Core courses: Terrestrial Navigation, Navigational Instruments, Maritime English, Cargo Transportation, Watchkeeping & Collision Prevention, Ship Management, Ship Handling, and Marine Meteorology & Oceanography, etc.
8.International Cruise Crew Management Program
This program cultivates highly-skilled professionals for operational and managerial jobs aboard international luxury cruises—including guest relations services cabin management, food & beverage services, recreation services, and cruise tourism product sales, in line with STCW Convention. They will be equipped with refined social etiquette, professional presence, strong English communication skills, exceptional service awareness, and collaborative teamwork capabilities. Core courses: Cruise Marketing, F&B Service Management, Guest Services & Management, Cabin Operations & Management, Beverage Knowledge & Service, Cruise Service English, Retail Operations, and Cruise Employment Interview English, etc.
9.Shipbuilding Engineering Technology Program
This program cultivates highly-skilled shipbuilding professionals with professional ethics, innovation capabilities, consistent craftsmanship, entrepreneurial potential, career sustainability, quality consciousness, and technical creativity. They will be qualified for ship construction, repair, inspection, technical/technique design, and production management. Core courses: Ship Design, Naval Architecture & Hydrodynamic Performance Calculations, Ship Blueprint Drafting Techniques, Structural Drawing Technology, Ship Lofting Techniques, NDT Technology & Applications, and Marine Materials & Welding, etc.
10.Marine Engineering Technology Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will be compliant with the amended STCW Convention and Chinese Seafarer Competency Standards, and competent in marine engine management, ship machinery inspection, engine construction and supervision, marine equipment manufacturing, and water transportation, etc. They will also perform well in vessel monitoring, engine room equipment operation/maintenance, ship operations, personnel management, and marine automation control, providing mid-to-high-end technical services with problem-solving capabilities for complex operations. Additionally, they will enjoy entrepreneurial potential, and the distinctive Chuanzheng “Technical Skill + Professional Literacy” dual-qualification profile, so as to support regional socioeconomic development. Core courses: Marine Diesel Engines, Marine Auxiliary Machinery, Marine Electrical Systems, Marine Automation Systems, Marine Engineering English, Ship Management, and Propulsion Plants, etc.
11.Environmental Engineering Technology Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will be able to support national ecological initiatives with their competencies in environmental monitoring, consulting, pollution prevention, and ecological restoration, alongside sector-specific skills in carbon management expertise, wastewater treatment, exhaust gas control, soil remediation, and noise abatement. Additionally, they will know thoroughly about environmental analysis, pollution control process design, EIA report preparation, and eco-equipment maintenance, driving regional green transition and sustainable development. Core courses: Water Pollution Control Technology, Air Pollution Control Technology, Soil Contamination & Remediation, Modern Environmental Analysis Techniques, Environmental Impact & Safety Assessment, Engineering Testing & Environmental Monitoring, and Environmental Professional Skills Integration, etc.
12.Safety Technology and Management Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. They can satisfy the demand of developing the country safely with well-established capabilities in safety assessment, risk management, and emergency response, alongside sector-specific competencies in transportation safety, construction safety, electrical safety, chemical process safety, and fire safety. Additionally, they can conduct safety management, risk identification, hazard rectification, and emergency planning to support regional socioeconomic development. Core courses: Transportation Safety Management and Control, Safety Assessment, Drone Aerial Inspection and Risk Evaluation, Emergency Accident Rescue, Occupational Hygiene Monitoring and Evaluation, Highway Construction Safety Management and Control, On-site First Aid and Medical Care, etc.
13.Computer Network Technology Program
In line with the digital economy sectors, this program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding, promoting regional economic and social development. Graduates will possess adequate scientific and humanistic literacy, professional ethics, and innovative mindset alongside consistent craftsmanship, entrepreneurial potential, and career sustainability. Graduates will be competent in roles of information and communication technology (ICT) such as engineers, network maintenance specialists, and operations administrators. They will also be able to perform well in installation, commissioning, and maintenance of network/cybersecurity appliances and cloud computing platforms, alongside network application development. Core courses: Routing & Switching Technologies, Linux OS Administration, Wireless Networking, Cybersecurity Device Configuration & Management, Automated Network Operations, Network Systems Integration, Virtualization & Cloud Technologies, and Network Penetration & Defense.
14.Software Technology Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. They will be specializing in development of application software systems for electronics information. Focused on developing expertise in WEB development, industrial control software engineering, mobile application development, and software testing, the curriculum provides the core courses: C# Programming, Database Design & Applications, Software Quality Assurance & Testing, Mini-Program Design & Development, Performance & Automation Testing, Front-End Framework Technologies, Embedded Systems Design & Development, and Software Engineering & Team Projects.
15.Artificial Intelligence Technology Application Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will be specializing in frontier fields of electronics and advanced equipment industries. With large language model technologies, deep learning, and intelligent transportation system development, graduates will know thoroughly about full-stack AI solutions with innovative thinking and practical capabilities. Rooted in an “AI + Transportation” specialization encompassing large language models, computer vision, and natural language processing, the program develops students’ competencies in data intelligence processing, algorithmic model development, intelligent robotics maintenance, and smart system integration/operation. Core courses: Large Language Model Application Development, Python Data Analysis & Processing, Deep Learning Applications, Natural Language Processing, Computer Vision Applications, Data Structures & Algorithms, Machine Learning, and Intelligent Transportation Application Development.
16.E-Commerce Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will possess strong humanistic literacy, professional ethics, consistent craftsmanship, entrepreneurial potential, and career sustainability. Equipped with specialized knowledge, technical expertise, and operational abilities, they will be competent for roles such as operations supervisors, omnichannel marketing supervisors, intelligent customer service supervisors, visual marketing designers, and Internet product development supervisors in internet services, wholesale, and retail industries. Their competencies encompass data-driven operations, online store management, community engagement operations, marketing campaign planning/execution, customer service management, visual design, and internet/e-commerce product development. Core Courses: Marketing, E-commerce Fundamentals, Adobe Photoshop Essentials & Applications, Video Editing, Business Data Analytics, Online Marketing Strategy, etc.
17.Modern Logistics Management Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will be capable of meeting modern logistics demands through theoretical knowledge and practical skills in transportation organization, warehousing management, distribution systems, logistics information processing, supply chain management, port logistics information management, port cargo transportatio management, terminal management, and logistics market development. Core courses: Modern Logistics Fundamentals, Smart Transportation Management, Intelligent Warehousing Operations, Logistics Service Marketing, Logistics System Planning & Design, Digital Supply Chain Operations, and Logistics IT Applications.
18.Unmanned Aerial Vehicle (UAV) Applications Technology Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will possess adequate humanistic literacy, professional ethics, quality awareness, innovative mindset and safety consciousness. Additionally, equipped with capabilities in drone assembly, debugging, maintenance, and repair, they will be competent for industry applications including aerial photography, equipment inspection, mapping surveys, and agricultural/forestry plant protection, strategically positioned to support Fujian’s development in low-altitude economy, smart transportation, and marine economy. Core courses: UAV Aerodynamics & Flight Principles; Aerial Photography Technology; Inspection Operations; Agricultural Applications; UAV Assembly & Commissioning; Flight Control Systems; Image Processing; and Mission Planning.
19.General Aircraft Maintenance Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will know thoroughly about low-altitude aircraft maintenance and preservation while possessing fundamental repair skills in aeronautical fasteners, standard wiring, piping systems, flight controls, avionics, and corrosion prevention. Additionally, graduates will be capable of satisfyingly performing inspection and servicing for mainstream helicopters (e.g., Robinson R44, Bell series), pre-flight/post-flight/transit checks during line maintenance operations, demonstrating their professional conduct complying to the industry standard and their innovative approaches to undertake general aviation maintenance management. Core courses: General Aircraft Maintenance Fundamentals, Aero-engine Structures & Repair, Aviation Electrical Systems & Maintenance, Aircraft Riveting & Airframe Repair, Flight Line Maintenance, General Aircraft Model-Specific Servicing, and Non-Destructive Testing of Aeronautical Materials.
20.Urban Rail Transit Operations Management Program
This program fosters hardworking and highly-skilled professionals with all-round moral, intellectual, physical and aesthetic grounding. Graduates will possess adequate humanistic and scientific literacy, professional ethics, innovative mindset and consistent craftsmanship entrepreneurial potential, and career sustainability. They will systematically master theoretical knowledge in rail transit operations management and acquire precise competencies for roles including station attendants, duty officers, integrated inspection technicians, and duty station masters. Additionally, they will achieve operational ability in train dispatching, passenger flow management, fare management systems, passenger services, safety protocols, and emergency response procedures, delivering specialized expertise to support regional socioeconomic development. Core Courses: Rail Transit Station Equipment, Passenger Service Management, Passenger Flow Organization, Fare Management Systems, Train Dispatching Operations, Operational Safety Management, Emergency Response Procedures, Station Operations Management. This integrated course system cultivates skills that can be applied in multiple different positions.
21.Urban Rail Transit Engineering Technology Program
Adhering to the educational philosophy of “comprehensive development of morality, intelligence, physique, aesthetics, and labor”, the major aims to cultivate high-quality talents with scientific and cultural literacy, humanistic feelings, professional ethics, and innovative awareness. It inherits the craftsmanship spirit and fosters strong employability and sustainable development potential. Students will systematically master professional knowledge and technical skills, focusing precisely on the fields of subway, light rail, and intercity rapid rail engineering. They will be deeply empowered for core positions such as production-line construction, test and detection, maintenance, and cost management, capable of undertaking tasks like engineering technology implementation, rail maintenance operations, and project management. The major delivers professional and highly-skilled talents for regional economic and social development.The core curriculum system includes Urban Rail Transit Engineering Materials, Urban Rail Transit Engineering Surveying, Urban Rail Transit Tunnel Construction, Subway Station Engineering Construction, Track Paving and Flaw Detection, Rail Transit Bridge Construction, Rail Transit Engineering Cost Practice, Railway Line Work, Track Fine Tuning and Precision Measurement, etc. It integrates theoretical teaching with practical training to strengthen the cultivation of job-adaptation capabilities.